Sanyo POA-WL11 Operation Manual page 32

Chapter 4. Setting up Wireless Imager
Parameter
Data Transfer Rate
Current User /PC
System Time
Location
Shows the current wireless communication speed of this system. The
communication speed is automatically changed by the environment at that
time (11 Mbps, 5.5 Mbps, 2 Mbps, or 1 Mbps). The communication speed
cannot be set at a fixed rate.
Shows the IP address of the personal computer, which is currently
transferring images to this system using WI Client.
Shows the elapsed time since the power is turned on.
The time can be reset by selecting "Reset" from the browser configuration
screen, or by disconnecting power from the projector and connecting back on.
Shows an installation location (desired place can be set) set on this system.
— 32 —
Description