Graphical Front Panel; Status; Contact Inputs; Virtual Inputs - GE L60 Instructions Manual

STATUS

6.2.2 Graphical front panel

The graphical front panel is a hardware option.
Annunciator alarms can be acknowledged and reset in this section.
To view alarms for the graphical front panel in EnerVista:
1. Access Actual Values > Graphical Panel > Annunciator Panel. Alarms are listed, allowing remote acknowledgement/
reset.
2. Click the Acknowledge or Reset button for an alarm.
6.3 Status

6.3.1 Contact inputs

6
ACTUAL VALUES  STATUS  CONTACT INPUTS
 CONTACT INPUTS

The present status of the contact inputs is shown here. The first line of a message display indicates the ID of the contact
input. For example, 'Cont Ip 1' refers to the contact input in terms of the default name-array index. The second line of the
display indicates the logic state of the contact input.

6.3.2 Virtual inputs

ACTUAL VALUES  STATUS  VIRTUAL INPUTS
 VIRTUAL INPUTS

The present status of the 64 virtual inputs is shown here. The first line of a message display indicates the ID of the virtual
input. For example, 'Virt Ip 1' refers to the virtual input in terms of the default name. The second line of the display indicates
the logic state of the virtual input.
6-4
Figure 6-2: Annunciator alarms displayed in the software)
Cont Ip 1

Off

Cont Ip xx

Off
Virt Ip 1

Off

Virt Ip 64

Off
CHAPTER 6: ACTUAL VALUES
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL