GE L60 Instructions Manual page 308
Line phase comparison system
Hide thumbs
Also See for L60:
- Instruction manual (736 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (578 pages)
Table of Contents
Advertisement
PRODUCT SETUP
5.3.5.13 Web server HTTP protocol
5
SETTINGS PRODUCT SETUP COMMUNICATIONS WEB SERVER HTTP PROTOCOL
WEB SERVER
HTTP PROTOCOL
The L60 contains an embedded web server and can display pages in a web browser. The web pages are organized as a
series of menus that can be accessed starting at the L60 "Main Menu." Web pages are read-only and are available showing
DNP and IEC 60870-5-104 points lists, Modbus registers, event records, fault reports, and so on. First connect the L60 and a
computer to an Ethernet network, then enter the IP address of the L60 Ethernet port in a web browser.
To close the port, set the port number to 0.
Any change takes effect when the L60 is restarted.
5-100
Figure 5-47: File transfer by IEC 61850
HTTP TCP PORT
NUMBER(80): 80
Range: 0 to 65535 in steps of 1
L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS
Advertisement
Table of Contents
