Ametek Drexelbrook Universal IV CM Installation And Operating Instructions Manual page 44

3.5 Menu Table (Continued)
Menu Function
(Display Abbreviation)
7.1
RESTORE FACTORY DEFAULTS OF
SYSTEM
(RST FAC)
7.2
LCD CONTRAST ADJUSTMENT
(CONTRST)
7.3
SOFTWARE VERSIONS
(SW VER)
7.3.1
DCM DATE CODE
(DCM)
7.3.2
HART DATE CODE
(HART)
7.4
MENU SCROLL ENABLE/DISABLE
(MSCROLL)
7.5
PARAMETER DISPLAYED ON POWERUP
(MENUIDX)
7.6
CALIBRATION PARAMETERS
(CAL PAR)
7.6.1
OIL DIELECTRIC CONSTANT
PARAMETER A (AKOD)
7.6.2
OIL DIELECTRIC CONSTANT
PARAMETER B (BKOD)
7.6.3
EFFECTIVE CAPACITANCE ON
CALIBRATION 1(EFF CAP)
7.6.4
EFFECTIVE DENSITY ON CALIBRATION 1
(EFF DEN)
7.6.5
EFFECTIVE TEMPERATURE ON
CALIBRATION 1 (EFF TMP)
Values
(Display Abbreviation)
Yes
No [Default]
Value
0-9
5 [Default]
Value
Read only Date Code
Value
Read only Date Code
Enable [Default]
Disable
0=H20 [Default]
1=Cap
2=4-20
3=Density
4=Temp
5=Flow
Value (Ref Only)
Value (Ref Only)
Value (Ref Only)
Value (Ref Only)
Value (Ref Only)
37
Configuration and Calibration
Description
Restore factory defaults of the system
Used to adjust the contrast ratio of the LCD screen
Enable or Disables the scrolling of menu descriptions
Parameter displayed on powerup
Oil Constant Dielectric Parameter A
Oil Constant Dielectric Parameter B
Effective Capacitance on Calibration 1
Effective Density on Calibration 1
Effective Temperature on Calibration 1