Messages - Cisco D9865 Installation And Operation Manual

Messages

General
The status of the D9865 receiver and its immediate surroundings is reported to the
receiver in the form of messages and alarms. You can enable or disable messages in
the Alarms & Warnings advanced settings.
D9865 Receiver Message List
The following table shows a list of the available messages and their default alarm
status. The Set Messages and Clear Messages are displayed in the Warning History
when the messages are set or cleared respectively.
Alarms
Alarm Message
Type
Signal Status Set
Clear
7-2
Message
Signal is lost
RF Signal - No
Content
Tuning Parameters
Invalid
Signal is locked
Tuning Parameters
Valid
D9865 Satellite Receiver Installation and Operation Guide
Cause/Remedy
Cause: Loss of RF
signal. Loss of RF
lock. Loss of
Transport data.
Invalid frequency or
other tuning
parameters.
Remedy: Check
cables. Check tuning
parameters.
Description Severity
Loss of signal Minor
RF Tuner locked,
but no TS
content.
One of the
tuning
parameters is
invalid
Signal OK
Tuning
parameters are
valid
4035197 Rev C