Setting Up The Video - Cisco D9865 Installation And Operation Manual

Setting up the Video

Setting up the Video

The video format is set to the standard format for your country. If you attempt to
change the format of the source video signal, a warning message appears, to inform
you that if the fields are incorrectly configured, the display may not be viewable.
Check with your satellite or local service provider before changing the video
settings to ensure it is set correctly. Press OK to continue with the edit. Otherwise,
select Cancel.
Note: If an error was made when changing the video settings, you can set the TV
video format using the front panel. For more information, see Setting the TV Video
Format, on page 3-4.
Proceed as follows to set up the video information.
1. From the Setup Menu screen, select Video Setup and click OK.
2. The following table describes each of the options in the Video Setup screen.
Selection
HD Video Output Auto
4035197 Rev C
Options
HD 1080i
HD 720p
D9865 Satellite Receiver Installation and Operation Guide
Description
Receiver automatically detects correct HD
video format.
Sets the HD output video format.
Default
Auto
4-33