Setting Up Audio - Cisco D9865 Installation And Operation Manual

Setting up Audio

To Set Up the Audio
Proceed as follows to set up the audio:
1. From the user interface of the D9865, click Audio & Video > Audio Setup/
Status. The Audio Setup/Status page is displayed.
Set the compressed audio type from the Digital Audio Setting drop-down list
(PCM, Dolby Digital, Compressed). The following table displays the effects of
Dolby Audio Preference setting on audio outputs, based on the type of audio being
decoded:
Input/
Output
MPEG LA
(MPEG1 and
MPEG2)
Dolby Digital
Dolby Digital Plus
(< 1.5 Mbps)
4035197 Rev C
PCM Dolby Digital
PCM PCM
PCM Dolby Digital
(follows IEC 61937)
PCM Dolby Digital
(follows IEC 61937)
D9865 Satellite Receiver Installation and Operation Guide
Digital Audio Preference
S/PDIF
PCM
Dolby Digital
(follows IEC
61937)
Dolby Digital
Plus (No over-
clocking,
follows SMPTE-
338)
Compressed
HDMI
PCM
Dolby Digital
(follows IEC
61937)
Dolby Digital
Plus (over-
clocking x4,
follows IEC
61937)
5-41