Viewing Dvb-Ci Information - Cisco D9865 Installation And Operation Manual

Viewing DVB-CI Information

The Common Interface (CI) slot is located behind the door on the front panel. They
allow use of a CAM (Conditional Access Module) Smartcard to decrypt purchased
programming.
Note: You must be authorized to view the programming available via the Smart
Card from your service provider.
Note: CAMs must be purchased from Cisco. For a list of the supported CAMs, see
Common Interface Modules, on page 3-5.
For more information on configuring the CI information, see Configuring the
Common Interface (CI) Information, on page 5-28.
To View the Current DVB-CI Information
Proceed as follows to view the DVB-CI information:
From the Info screen, select DVB-CI and press OK.
The DVB-CI Information screen displays the following information:
DVB-CI Information
CI System Name
CAM Manufacturer
CAM Serial Number
CAM Product Name
CAM Hardware Version Displays the hardware version number of the CAM.
CAM Application
Version
CAM Status
4035197 Rev C
Indicates the system name of the CAM.
Displays the manufacturer name of the CAM.
Indicates the unique serial number of the CAM.
Displays the product name of the CAM.
Displays the software version number of the CAM.
Displays the status of the CAM (Ready or Not
Ready).
D9865 Satellite Receiver Installation and Operation Guide
Description
4-77