Cisco D9865 Installation And Operation Manual page 29

About the Front Panel,
To change a setting on a menu using the front panel:
1. Use the
Select button to select the setting.
2. For numeric options, you can:
• use the
• navigate to Keyboard using the
keyboard.
3. To access the menus at the bottom of the screen (for example, Save), navigate to
the appropriate selection using the
message is displayed at the bottom of the screen.
4. Press Menu to move to the previous menu.
Front Panel LEDs
The functions of the LEDs are described in the table below.
MUTE
SIGNAL
MENU
CI Slot
The CI Slot allows the use of CAM (Conditional Access Module) Smart Card to
decrypt purchased programming. For setup information, see Viewing DVB-CI
Information, on page 4-77 and Configuring the Common Interface (CI)
Information, on page 5-28. For a list of supported CAMs, refer to Common
Interface Modules, on page 3-5.
4035197 Rev C
Continued

buttons to move to the setting you want to change. Press the

buttons to change the value one digit at a time, or
LED
• On when sound is muted.
• On when receiver is synchronized with the incoming
digital signal and authorized for the current channel.
• Flashing when a signal has been found, but receiver is
not authorized for the current channel.
• Off when no signal has been found. For more
information about troubleshooting your satellite
receiver, see Troubleshooting, on page 7-19.
• On when on-screen menus are displayed.
D9865 Satellite Receiver Installation and Operation Guide

buttons to use an on-screen

buttons and press Select. A help
Function
3-3