Action in the Event of a Malfunction
If a system or any equipment in a system malfunctions, shut off the system immediately and perform the
following steps:
•
Disconnect and lock out system electrical power. If using hydraulic and pneumatic shutoff valves, close
and relieve pressure.
•
Identify the reason for the malfunction and correct it before restarting the system.
•
For EFD air-powered dispensers, remove the syringe barrel from the adapter assembly. For EFD
electro-mechanical dispensers, slowly unscrew the barrel retainer and remove the barrel from the
actuator.
Disposal
Dispose of equipment and materials used in operation and servicing according to local codes.
RoHS标
关
有 物
Part Name
Toxic or Hazardous Substances and Elements
Lead
(Pb)
头
X
All Brass Fittings
O: 表
所 有的危险成分或有 物
的标
SJ/T11363-2006 限 要 。
O:
Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,
according to EIP-A, EIP-B, EIP-C is below the limit requirement in SJ/T11363-2006.
X: 表
所 有的危险成分或有 物
的标
SJ/T11363-2006 限 要 .
X:
Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,
according to EIP-A, EIP-B, EIP-C is above the limit requirement in SJ/T11363-2006.
Important Safety Information
All EFD disposable components, including syringe barrels, cartridges, pistons, tip caps, end caps, and
dispense tips, are precision engineered for one-time use. Attempting to clean and re-use components
will compromise dispensing accuracy and may increase the risk of personal injury.
Always wear appropriate protective equipment and clothing suitable for your dispensing application.
•
Do not exceed maximum operating pressure of 100 psi (7.0kg/cm2).
•
Do not heat syringe barrels or cartridges to a temperature greater than 100°F (38°C).
•
Dispose of components according to local regulations after one-time use.
•
Do not clean components with strong solvents (e.g. MEK, Acetone, THF).
•
Cartridge retainer systems and barrel loaders should be cleaned with mild detergents only.
•
To prevent fluid waste, use EFD SmoothFlow
www.efd-inc.com info@efd-inc.com
(China RoHS Hazardous Material Declaration)
元
镉
Mercury
Cadmium
Hexavalent
Chromium
(Hg)
(Cd)
(Cr6)
O
O
O
照EIP-A, EIP-B, EIP-C
照EIP-A, EIP-B, EIP-C
TM
pistons.
USA & Canada 800.556.3484 Europe +44 (0) 1582 666334 Asia & China: +86 (21) 3866 9006
dispensing systems are available worldwide .
Sales and service of EFD
®
联
联
Polybrominated
Polybrominated
Biphenyls
Diphenyl Ethers
(PBB)
(PBDE)
O
O
EFD
Product
Safety
Statement
7