Page 1
USA-compatible plug and three international plugs. Attach the correct plug to match local power outlets. • Connect the power cord into the back of the Ultra 2400. • Connect the power cord into your local power source. • Press the power switch on the front panel.
Page 2
(#2000F755). • Push one end of the air input hose into the input fitting on the back of the Ultra 2400. • Connect the other end of the air input hose to your plant air supply.
Page 3
• Press SAVE. This saves the time and returns you to the Home screen. Set Dispense Time The Ultra 2400 is shipped with all values set to zero. To set dispense time, follow these steps: • Begin in TIMED mode.
45º Helpful Hints • There are three core variables to the Ultra 2400: time, pressure and vacuum. Adjust just one of these at a time, in small increments, to achieve your ideal deposit. • Another important variable is tip size. Choose the right tip for your deposit type.