EFD ULTIMUS V User Manual page 23

Communications Port Options Screen
• The Communications Port settings screen allows
the user to select which RS-232 port is active.
The firmware will not allow both ports to be enabled
at the same time.
• Pressing the Enter key when Baud Rate is selected
will display the Baud Rate selection screen.
• Pressing the F2 (Save) key will store the
communications port settings.
Contrast Control
• The LCD contrast can be adjusted from 0 to 63
levels. As the contrast ratio is adjusted up or down,
the LCD will automatically adjust to the new ratio.
• The Easy Adjust buttons {Plus (+)/Minus (-) arrow
keys} will increase or decrease the LCD contrast
ratio. The F2 (Save) key will store the LCD Contrast
settings.
Information Screen
• The information screen displays the SAP part
number for the dispenser and the name Ultimus V.
The Technical Support phone number and web
address are also displayed.
• VER: is the version number of the Main board
firmware.
www.efd-inc.com info@efd-inc.com USA & Canada 800.556.3484 Europe +44 (0) 1582 666334 Asia & China: +86 (21) 3866 9006
dispensing systems are available worldwide .
Sales and service of EFD ®
Basic Menu
Operation
23