EFD ULTIMUS V User Manual page 43

2.3.4 Memory Location Feedback Command
This command returns the current memory location to which the dispenser is set. 'D0' is the letter
'D' followed by the digit '0'.
Host Format: UA---
Return Format: D0ccc
ccc: The 3-digit memory location from 0-399.
2.3.5 Pressure Units Feedback Command
This command returns the units the dispenser is using to display pressure. 'D0' is the letter 'D'
followed by the digit '0'.
Host Format: E4--
Return Format: D0PUuu
uu: The pressure units. 00 = PSI, 01 = BAR, 02 = KPA
2.3.6 Vacuum Units Feedback Command
This command returns the units the dispenser is using to display vacuum. 'D0' is the letter 'D'
followed by the digit '0'.
Host Format: E5--
Return Format: D0VUuu
uu: The vacuum units. 00 = KPA, 01 = Inches H 2 O, 02 = Inches Hg, 03 = mmHg, 04 = TORR.
2.3.7 Total Status Feedback Command
This command returns the status and values of the Auto Increment mode as well as the dispense
mode. This command is the same command as the Musashi 808FX Total Status command, thus
Vacuum Interval mode status is included in the command string. The Ultimus V does not support this
mode; therefore this data is defaulted to safe values. 'D0' is the letter 'D' followed by the digit '0'.
Host Format: AU---
Return Format: D0AIiMmSssssDdddddddVIqVvvvvIttttTMxSAaaaEeee
i: Auto Increment mode status. 0 = Off, 1 = Enabled
m: Auto Increment mode function. 1 = Timer, 2 = Count, 4=Auto Sequence Mode
ssss: Trigger Value. The upper digit is truncated to make this function compatible with the Musashi
command.
ddddddd: Current Timer/Counter value
q: Defaulted to 0
vvvv: Defaulted to 0001
tttt: Defaulted to 0001
x: Dispense mode. 0 = Timed, 1 = Steady, 2 = Teach
aaa: Auto Increment Start Address. 000 - 399
eee: Auto Increment End Address. 000 - 399
www.efd-inc.com info@efd-inc.com USA & Canada 800.556.3484 Europe +44 (0) 1582 666334 Asia & China: +86 (21) 3866 9006
dispensing systems are available worldwide .
Sales and service of EFD ®
APPENDIX B
RS-232
Connection
Protocol
43