Initial Settings - EFD ULTIMUS V User Manual

INITIAL SETTINGS

Note: Dispenser settings and dispensing parameters can be entered manually using the keypad and
buttons on the dispenser, or via Ultimus V Interactive Software.
Note: To facilitate setup, begin by setting the language in which data will be displayed. Refer to " Setting
Language " below.
The following examples show data being entered manually.
For instructions on using the PC Interface Software, refer to the appropriate documentation.
• Press the power switch to turn on the dispenser. The Main screen will be displayed and show all the
dispensing parameters. The first time the dispenser is powered up, all settings will be preset to zero.
AI Auto Increment Function
MEM Current Memory Address
TIME Dispensing Time
PRES Dispensing Pressure
VAC Vacuum
SHOT Dispense Counter
Dispensing Status (shown as icons)
www.efd-inc.com info@efd-inc.com USA & Canada 800.556.3484 Europe +44 (0) 1582 666334 Asia & China: +86 (21) 3866 9006
dispensing systems are available worldwide .
Sales and service of EFD ®
Initial
Settings
17