JLG 800A Operation And Safety Manual page 33

13. Control Valve (Tank Compartment) -
lug nuts, proper inflation (pneumatic). Inspect for worn tread,
cuts, tears or other discrepancies. Inspect wheels for damage
and corrosion.
14. Turntable Bearing and Pinion - No loose or missing hard-
ware; no visible damage, evidence of proper lubrication.
15. Hydraulic Oil Medium Pressure Filter Housing -
Inspection Note.
16. Hydraulic Oil Return Filter Housing -
17. Manual Descent -
18. LP Gas Tank - Brackets, hose and fittings secure; no visible
damage, no missing parts. (If Equipped)
19. Hydraulic Oil Supply - Recommended oil level sight
gauge. (Check level with cold oil, systems shut down,
machine with booms retracted and lowered) Cap in place
and secure.
20. Hydraulic Oil Breather - Element in place, not clogged, no
sign of overflow.
21. Ground Controls - Switches operable, no visible damage,
decals secure and legible.
3121209
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
No loose or missing
See Inspection Note.
(if equipped)
See Inspection Note.
Figure 2-5. Daily Walk-Around Inspection (Sheet 3 of 4)
22. Fuel Supply - Fuel filler cap secure. Tank - no visible dam-
age; no evidence of leaks.
23. Swing Drive Motor and Brake -
24. Door and Latches - Hood door and latches in working
condition, properly secured, no loose or missing parts.
25. Oscillating Cam Valve - No visible damage, no evidence of
See
leakage, no unsupported hoses. (If Equipped)
26. Tie Rod and Steering Linkage -
27. Oscillating Axle Cylinder -
Equipped)
28. Dual Capacity and Horizontal Cutout Limit Switches if
equipped - Properly secured, no damage to the switches,
arm free to move, and free from dirt and grease.
29. Oscillating Axle -
– JLG Lift –
See Inspection Note.
See Inspection Note.
See Inspection Note.
(If Equipped)
See Inspection Note.
(If
2-9