JLG 800A Operation And Safety Manual page 58

ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANT TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
9. Platform Leveling Override
A three position switch allow the operator to adjust the
automatic self leveling system. This switch is used to adjust
platform level in situation such as ascending/descending a
grade.
10. Articulating Jib Boom (If Equipped)
The ARTICULATING control switch provides raising and low-
ering of the jib when positioned to UP or DOWN.
11. Fuel Select (Dual Fuel Engine Only) (If Equipped)
Gasoline or liquid propane fuel may be selected by moving
the switch to the appropriate position. It is unnecessary to
purge the fuel system before switching fuels, so there is no
waiting period when switching fuels while the engine is run-
ning.
3121209
SECTION 3 - MACHINE CONTROLS AND INDICATORS
12. Work Lights (If Equipped)
The switch, on the light, operates work lights if the machine
is so equipped. The power/emergency stop switch must be
on, (mushroom button out) but ignition switch does not
have to be on to operate the lights, so care must be taken to
avoid draining the battery if left unattended. The master
switch and / or the ignition switch at the ground control will
turn off power to all lights.
– JLG Lift – 3-13