JLG 800A Operation And Safety Manual page 37

SkyGuard Function Test
From the Platform Console:
Test the SkyGuard feature by operating the telescope out functions
and then activating the SkyGuard sensor. The telescope out function
will stop and the telescope in function will operate for a short dura-
tion and the horn will sound until the SkyGuard sensor and foot-
switch are disengaged.
3121209
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
– JLG Lift –
NOTE: If the machine is equipped with both SkyGuard and Soft Touch,
functions will not reverse, only stop.
NOTE: If equipped, ensure the SkyGuard beacon illuminates when Sky-
Guard is activated.
Disengage the SkyGuard sensor, release controls, recycle the
emergency stop button, and make sure normal operation is avail-
able.
If SkyGuard remains activated after function reversal or cutout,
depress and hold the SkyGuard Override Switch to allow normal
use of machine functions until the SkyGuard sensor is disen-
gaged.
2-13