Customizing The Riding Mode: Setting The Dtc Level - Ducati Diavel 2014 Owner's Manual

Customizing the Riding Mode: setting the
DTC level
This function allows customising DTC (Ducati Traction
Control) intervention level and, if necessary, disabling
it for each single riding mode.
To gain access to this function display the "setting"
menu page 80, use buttons (1) or (2) to select the
"RIDING MODE" function and press the reset button
(4) to shift to next page.
Use buttons (1) or (2) to select the riding mode you
wish to change and press the reset button (4).
To access next page, select "DTC" using button (1) or
(2) and press again the reset button (4) to confirm
selection.
Once function is accessed, the currently set DTC
level is displayed on the left side inside a rectangle
(ex: DTC 1).
Use buttons (1) or (2) to select the new level (1 to 8) or
the OFF indication to disable Traction Control System;
once the new setup is selected, press the reset
button (4) to highlight "MEMORY".
Now store the new setting by keeping the reset
button (4) pressed for 3 seconds with the "MEMORY"
highlighted.
If setting has been stored successfully,
"MEMORIZED" will appear in green for 2 seconds,
and "EXIT" will be automatically highlighted.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
85