Functional Configuration - Canon Inner Booklet Trimmer-A1 Service Manual

2
Technology > Basic Configuration > Functional Configuration
Basic Configuration

Functional Configuration

This equipment is mainly consists of a feed block, trimming block, paper delivery block, and
waste paper stack block.
Receives the booklet stitched by the saddle stitcher, and then delivers it to
Feed block
[1] the next block.
T r i m m i n g Trims the fore edge of the stitched booklet.
* When trimming is not done, the booklet just passes through the trimming
block [2]
block.
Applies pressure on the press rollers during transfer, delivery, registration,
P a p e r
d e l i v e r y and trimming of the stitched booklet.
* When trimming is not done, registration of the booklet is not done either.
block [3]
Collects the waste paper generated when fore edges of booklets are
Waste paper
stack block trimmed.
[4]
2 Technology > Basic Configuration > Functional Configuration
3. Paper delivery block
2. Trimming block
1. Feed block
4. Waste paper stack block
F-2-1 F-2-1
2-2
2-2