4
Parts Replacement and Cleaning Procedure > Solenoids > Removing the paddle solenoid (SL102)
Solenoids
Removing the paddle solenoid (SL102)
3) Remove 2 far side connectors and remove 2 screws. Remove 3 front side screws and pull out 3 pins.
1)Remove the trimmer unit from the
finisher.
2)Remove the waste paper box.
4)Remove the registration unit in the direction of the arrow.
4
Parts Replacement and Cleaning Procedure > Solenoids > Removing the paddle solenoid (SL102)
x2
x2
5) Remove the cable from 4 cable guides at the registration unit entrance side and remove 2 connectors.
F-4-40
F-4-40
x3
F-4-39
F-4-39
x2
x4
F-4-41
F-4-41
4-17
4-17