4
Parts Replacement and Cleaning Procedure > Sensors > Removing the waste paper full sensor (light receiving/S011(PCB3))
Removing the waste paper full sensor (light receiving/S011(PCB3))
1) Open the finisher front door.
3)Remove 1 screw and pull out the connector.
4
Parts Replacement and Cleaning Procedure > Sensors > Removing the waste paper full sensor (light receiving/S011(PCB3))
2) Pull out the saddle unit.
F-4-58
F-4-58
x1
F-4-59
F-4-59
x1
F-4-60
F-4-60
4-25
4-25