Installation Procedure; Making Preparations For Installing The Finisher - Canon Inner Booklet Trimmer-A1 Service Manual

5
Installation > Installation Procedure > Making Preparations for Installing the Finisher

Installation Procedure

Making Preparations for Installing the Finisher

MEMO:
•
When installing this machine after
installing the finisher to the host
machine, install this machine after
releasing the finisher from the host
machine.
The equipment is secured with
•
packaging tapes and cushioning
materials to protect it against
vibration and shock during
transportation. Remove all
packaging tapes and cushioning
materials before installing the
equipment.
3
3) Remove the front door of the finisher in the direction of the
arrow.
5
Installation > Installation Procedure > Making Preparations for Installing the Finisher
1
1) Open the front door of the finisher.
F-5-2 F-5-2
4
4) Remove the jam dial (upper).
Remove one screw, and then remove the jam dial (lower).
x1
F-5-4 F-5-4
2
2) Remove the resin ring.
5
5) Remove three screws, and then remove the inner
cover.
x3
F-5-5 F-5-5
5-3
F-5-3 F-5-3
F-5-6 F-5-6
5-3