4
Parts Replacement and Cleaning Procedure > PCBs > Removing the trimmer controller PCB (PCB1)
PCBs
Removing the trimmer controller PCB (PCB1)
1) Remove the trimmer unit from the finisher.
3) Pull out all connectors on the trimmer controller PCB.
x7
4
Parts Replacement and Cleaning Procedure > PCBs > Removing the trimmer controller PCB (PCB1)
2) Remove 3 screws and remove the PCB cover.
4) Remove 3 screws, 1 locking support, and remove the trimmer controller PCB.
F-4-63
F-4-63
x2
x3
4-27
x1
F-4-62
F-4-62
F-4-64
F-4-64
4-27