Configuring The Thor Vm1 With Lxeconnect; Install Lxeconnect - Honeywell Thor VM1 Reference Manual

Configuring the Thor VM1 with LXEConnect

LXEConnect allows a user to view the Thor VM1 screen remotely from a PC using an ActiveSync connection:
Requirements: ActiveSync version 4.5 (or higher) must be resident on a Windows XP (desktop/laptop) host computer.
Windows Mobile Device Center (version 6.1 or higher) is required for a Windows Vista/Windows 7 desktop/laptop computer.
ActiveSync is already installed on the Thor VM1. The Thor VM1 is preconfigured to establish a USB ActiveSync connection to
a host PC when the USB cable is attached to the Thor VM1 and the host PC.

Install LXEConnect

1. Contact your representative
2. Download the files to a location on your host PC hard drive.
3. Execute the setup.exe file that was copied to the host PC. This setup program installs the LXEConnect utility.
4. Follow the on screen installation prompts. The default installation directory is C:\Program Files\LXE\LXEConnect.
5. When the installation is complete, create a desktop shortcut to the following file: C:\Program
Files\LXE\LXEConnect\LXEConnect.exe. If a different directory was selected during installation, please substitute the
appropriate directory.
6. LXEConnect is now installed on the host PC and ready to use.
4-6
for the LXEConnect files.