Fc1 Front Markings; Front Markings For An Fc1 With 1/3 Housing Width; Elster Front Design - Honeywell enCore FC1 Instructions For Use Manual

1 FC1 front markings

The FC1 device is available in two housing sizes, i.e. with a housing width of
1/3 for up to four process boards or a housing width of 1/2 for up to seven
process boards. The front plate for both housing widths is available in two
designs (Elster or Honeywell).

1.1 Front markings for an FC1 with 1/3 housing width,

Elster front design

Figure 1: FC1 front view with position of type plates

Location of type plate part 1

Location of type plate part 2

Securing marks (adhesive labels), example
DOCUMENT: FC1: MARKINGS AND DEVICE SEALING
(1/3 housing width, Elster design)
PAGE: 2 OF 12