Honeywell Thor VM1 Reference Manual page 273

Parameter
RX Diversity
Frag Thresh
RTS Thresh
LED
Tray Icon
Hide Password
Admin Password
Auth Timeout
Default
How to handle antenna diversity when receiving packets from the Access
Point.
ABG: On Start
Options are: Main Only (use the main antenna only), Aux Only (use the
on Main
auxiliary antenna only), On-start on Main (on startup, use the main antenna),
or On-start on Aux (on startup, use the auxiliary antenna).
If the packet size (in bytes) exceeds the specified number of bytes set in the
fragment threshold, the packet is fragmented (sent as several pieces instead
of as one block). Use a low setting in areas where communication is poor or
2346
where there is a great deal of wireless interference.
This parameter cannot be changed.
If the packet size exceeds the specified number of bytes set in the Request
to Send (RTS) threshold, an RTS is sent before sending the packet. A low
RTS threshold setting can be useful in areas where many client devices are
2347
associating with the Access Point.
This parameter cannot be changed.
The LED on the wireless card is not visible to the user when the wireless
card is installed in a sealed mobile device.
Off
Options are: On, Off.
This parameter cannot be changed.
Determines if the Summit icon is displayed in the System tray.
On
Options are: On, Off
When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are viewed.
On
When Off, password characters are not masked.
Options are: On, Off.
A string of up to 64 alphanumeric characters that must be entered when the
Admin Login button is tapped. If Hide Password is On, the password is
SUMMIT
masked when typed in the Admin Password Entry dialog box. The password
(or Blank)
is case sensitive. This value is masked when the Admin is logged out.
Options are: none.
Specifies the number of seconds the Summit software waits for an EAP
authentication request to succeed or fail.
If the authentication credentials are stored in the active profile and the
authentication times out, the association fails. No error message or
8 seconds
prompting for corrected credentials is displayed.
If the authentication credentials are not stored in the active profile and the
authentication times out, the user is again prompted to enter the credentials.
Options are: An integer from 3 to 60.
Function
6-17