Primary Events; User Primary Events; System Primary Events; Wake Source Events - Honeywell Thor VM1 Reference Manual

Primary Events

User Primary Events

A User Primary Event transitions the Thor VM1 to D0 (On) mode. When no user event happens for the specified time period,
the Thor VM1 transitions to D1 (User Idle), then D2 (System Idle) and then D3 (Suspend). Timeout periods are set via the
Schemes tab in the Power control panel.
User primary events include:
Any key press on the keypad
l
Touch on the touchscreen
l
USB data entry (from a USB keyboard or mouse)
l

System Primary Events

A System Primary Event allows the Thor VM1 to transition to D2 (System Idle) but the Thor VM1 does not enter D3 (Suspend)
as long the system event occurs.
System primary events include:
Serial data transfer
l
USB data transfer
l

Wake Source Events

These events wake the Thor VM1 from suspend:
Power button
l
Touch on the touchscreen
l
Any keypress on the keyboard
l
USB connect / disconnect
l
Truck power on or off (i.e. ignition key)
l
RTC
l
Bluetooth connection
l
External power connection
l
Serial port CTS control line
l
Headset connection (this is not enabled by default, but can be configured to wake the Thor VM1)
l
Events generated by these actions are not processed. For example, the screen press or touchscreen tap that wakes the Thor
VM1 is ignored.
The following events DO NOT wake the Thor VM1 from suspend:
Bluetooth keyboard or mouse
l
Serial data
l
802.11 radio
l
External power disconnect
l
2-7