Field Replaceable Front Panel; How To: Replace Front Panel - Honeywell Thor VM1 Reference Manual

Field Replaceable Front Panel

Equipment Required - User Supplied:
Torquing tool capable of measuring inch pounds
l
#2 Philips screwdriver bit
l
Caution
Before replacing the Thor VM1 front panel, the internal
The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touchscreen and optional
defroster. Should any of these components fail, the front panel assembly can easily be replaced to reduce downtime. The
replacement front panel is available in several configurations:
64-key ANSI keyboard with standard touchscreen
l
64-key 3270 keyboard with standard touchscreen
l
64-key 5250 keyboard with standard touchscreen
l
12-key keyboard with standard touchscreen
l
64-key ANSI keyboard with cold storage touchscreen
l
64-key 3270 keyboard with cold storage touchscreen
l
64-key 5250 keyboard with cold storage touchscreen
l
12-key keyboard with cold storage touchscreen
l

How To: Replace Front Panel

1. Place the Thor VM1 on a clean, well-lit surface before performing the front panel replacement.
2. Place the Thor VM1 in Suspend by pressing the Power button.
3. Remove the Thor VM1 from the Quick Mount Smart Dock.
4. Disconnect the UPS.
5. Loosen the fourteen (14) captive M3 screws holding the front panel. Use a #2 Philips bit.
UPS battery must be disconnected.
2-39