Using Bluetooth; Initial Configuration - Honeywell Thor VM1 Reference Manual

Using Bluetooth

Start > Settings > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop
or
The Thor VM1 default Bluetooth setting is Enabled.
The Thor VM1 Bluetooth
Prerequisite: The Bluetooth devices have been setup to allow them to be "Discovered" and "Connected/Paired". The System
Administrator is familiar with the pairing function of the Bluetooth devices.
Bluetooth Devices Display - Before Discovering Devices
Note: When Filtered Mode is enabled, only Bluetooth printers or Bluetooth scanners/imagers are
recognized and displayed in the Bluetooth panel. All other Bluetooth devices are ignored.

Initial Configuration

1. Select Start > Settings > Control Panel > Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth Thor VM1 default name is
determined by the factory installed software version. A unique name (up to 32 characters) should be assigned to every
Thor VM1 before Bluetooth Discovery is initiated.
4. Check or uncheck the Thor VM1 Bluetooth options on the Settings and Reconnect tabs.
5. Tap the OK button to save your changes or the X button to discard any changes.
3-66
Bluetooth taskbar icon
®
module is designed to Discover and pair with nearby Bluetooth devices.