Honeywell Thor VM1 Reference Manual page 114

Message
Timeout looking for app
window
ToUser after admin, not
at boot
ToUser after admin-app
still open
ToUser after admin-no
app or cmd line change
Unable to move desktop
Unable to move taskbar
Unhook taskbar wndproc
failure
Unhook wndproc failure
Unhooking taskbar
Unhooking wndproc
WM_SIZE adjusted
X after Ctrl+L
Ret from password <#>
Decrypt data len <#>
Window handle to enum-
windows=%x
WM_WINDOWPOSCHG
adjusted=%x
3-52
Explanation and/or corrective action
After the application is launched, AppLock must wait until the application has initialized
itself before proceeding. The application did not start successfully and AppLock has timed
out.
The user mode switch is attempted when the device boots and after the administrator
presses the hotkey. The mode switch is being attempted after a hotkey press.
The switch to user mode is being made via a hotkey press and the administrator has left
the application open and has not made any changes in the configuration.
If user mode is being entered via a hotkey press, the administrator may have left the con-
figured application open. If so, AppLock does not launch the application again unless a
new application or command line has been specified; otherwise, it just locks it.
The desktop is moved when switching into user mode. This prevents them from being vis-
ible if the application is exited and restarted by the timer. This error does not affect the
screen mode switch; processing continues.
The taskbar is moved when switching into user mode. This prevents them from being vis-
ible if the application is exited and restarted by the timer. This error does not affect the
screen mode switch; processing continues.
AppLock could not remove its control of the taskbar. This error does not affect AppLock
processing
AppLock could not remove the hook that allows monitoring of the application.
In administration mode, the taskbar should return to normal operation, so AppLock's con-
trol of the taskbar should be removed.
When the administrator leaves user mode, the device is fully operational; therefore,
AppLock must stop monitoring the locked application.
This message denotes that AppLock has readjusted the window size.
Processing the backdoor entry.
Return value from password dialog.
Length of decrypted password.
The window handle that is passed to the enumeration function. This message can be
used by engineering with other development tools to trouble shoot application lock fail-
ures.
Output the window size after it has been adjusted by AppLock
Level
LOG_ERROR
LOG_EX
LOG_EX
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX