Peripherals - Honeywell Thor VM1 Reference Manual

Peripherals

Start > Settings > Control Panel > Peripherals
This panel is used to enable and disable the defroster.
Factory Default Settings
Defroster
Defroster Trip Point
Note: Settings have no effect if the defroster is not installed.
The screen displays the information about the defroster:
If the defroster is installed or not installed
l
The current state of the defroster, ON or OFF
l
If the defroster (if installed) is Enabled or Disabled
l
The defroster trip point.
l
Tap the Test button to determine the presence of the defroster. Use this button when the front panel of the Thor VM1 has been
swapped. For example, if the Thor VM1 did not contain a defroster but a new front panel with a defroster is installed, tap the
Test button to update the defroster presence status on this tab.
If a defroster is installed, the defroster can be switched between the Enabled and Disabled states using the radio buttons on
this tab. The default is Enabled.
Specify the Defroster trip point. The default trip point is 40ºC/104ºF.
3-140
Enabled (if installed)
40ºC