Honeywell Thor VM1 Reference Manual page 266

Parameter Default
It is important the Radio Mode parameter correspond to the AP to which the device is to connect. For example, if this
parameter is set to G rates only, the Thor VM1 may only connect to APs set for G rates and not those set for B and G rates.
Contact your representative
6-10
BGA Rates Full (All B and G rates and all A rates with B and G rates preferred)
Ad Hoc (when connecting to another client device instead of an AP)
Default:
BGA Rates Full (for 802.11a/b/g radio)
if you have questions about the antenna(s) installed on your Thor VM1.
Explanation