Stylus
Start > Settings > Control Panel > Stylus
Use this control panel option to set stylus double-tap sensitivity properties and calibrate the Thor VM1 touch panel when
needed.
Double-Tap
Follow the instructions on the screen and tap the OK button to save any double-tap changes.
Calibration
Calibration involves tapping the center of a target. If you miss the center, keep the stylus on the screen, slide it over the
target's center, and then lift the stylus.
To begin, tap the Recalibrate button on the screen with the stylus. Press and hold the stylus on the center of the target as it
moves around the screen. Press the Enter key to keep the new calibration setting or press the Esc key to revert to the previous
calibration settings.
Note:
If the touch screen looses calibration on a Thor VM1 with the 12 key keypad, you must use a USB
mouse or keyboard attached to the Thor VM1 to access this tab to recalibrate the touch screen.
3-150