Table of Contents
Advertisement
7. Basic setup procedures
W
ARNING
stabilized with ballast. This to prevent possible tip over and sliding of the LED wall due to wind-force or other
external influences.
It is the responsibility of the installer to ensure the stability of the LED wall. Note that the stability of the LED
wall depends on different parameters like: wind-force, weight of display, height of display, width of display,
length of used foot beams and position of LED wall on foot beams (front - middle ?).
42
:
Foot beams of LED walls must always be firmly secured to the floor with fixings (preferred) or
R5905160 X8 RENTAL DISPLAY 25/02/2013
Advertisement
Table of Contents
