Table of Contents
Advertisement
4.2
X8 Module
Introduction X8 Module
The front of the X8 module consists of a matrix of full color SMD LED's enclosed by shaders and sheltered in a light weight housing.
The rear of the X8 module is equipped with two positioning pins and two latches which enable a precise and fast attachment into
the support grid. Power and data are passed through the two circular waterproof connectors.
Parts location of an X8 Module
Image 4-3
X8 module
1
Module positioning pin.
2
Module fastener (latches).
3
Module ventilation grid.
4
Power input/output port.
5
Data input/output port.
C
AUTION
bonate. This foil ensures that the front of the X8 module is waterproof.
Cables used with the X8 module
The interconnection between the X8 modules is done with two custom designed cable strings. One for data and one for power. One
cable string, either data or power, connects three X8 modules with the X8 Connection Box. The plugs on the cable string have a
quarter turn locking mechanism which ensures a watertight connection with the X8 module or X8 Connection Box.
Image 4-4
X8 Module data cable string.
X8 Module dummy plugs must be used to seal one of unused plugs of the X8 Module cable string.
R5905160 X8 RENTAL DISPLAY 25/02/2013
1
4
1
5
:
Handle the X8 modules with care. Note that the foil, covering the LED's, is made of thin polycar-
Image 4-5
X8 Module power cable string.
4. Components of a X8 Rental Tile
2
3
6
19
Advertisement
Table of Contents
