Replacement Of Fuses - GE MicroCal iTC200 Operating Instructions Manual

5 Maintenance
5.9

Replacement of fuses

5.9 Replacement of fuses
The MicroCal iTC
instrument, below the power switch and above the plug. If the fuses repeatedly blow,
unplug the instrument and contact your local GE Healthcare representative.
56
WARNING
Always disconnect power supply from the instrument before replacing
fuses.
WARNING
Replace fuses ONLY with same type and of fuse and rating. Several spare
fuses are supplied with the original shipment and the power receptacle
is labeled with the correct type.
has two fuses, found in the power receptacle at the rear of the
200
MicroCal iTC Operating Instructions 28-9639-77 AA
200