Procedures After A Run - GE MicroCal iTC200 Operating Instructions Manual

4.10 Procedures after a run

The MicroCal iTC
will keep the system electronics at the normal operating temperature.
It is recommended that the power of the MicroCal iTC
extended periods of down time, such as holidays and vacations.
After use, clean the sample cell following procedure in Section 4.7 and fill the sample cell
with distilled water. Wash and dry the syringe using procedure in section Section 4.7.
MicroCal iTC Operating Instructions 28-9639-77 AA
200
was designed to have its power on for extended periods of time. This
200
NOTICE
For quick start up leave instrument on.
Operation 4
Procedures after a run 4.10
cell be turned off during
200
47