Appendix E. Installation - Promag TR510E Manual

Appendix E. Installation

Please install DISK5212 Software before using TR510E series.
includes [DS Manager] and [TR510E Application Program].
procedure is as follows.
1. Ethernet Interface TR510E:
Hub to TR510E (using cable WAS-1499)
1. Open the program DS Manager. It will automatically detect the IP Address
of the TR510E on line.
(The default IP address is 1.0.0.1, if it doesn't show up in the IP list window,
it may blocked by Firewall, you should disable the firewall protection
function temporarily, then click [Refresh] for show all IP in IP list window.
For DS Manager cannot detect the IP address in use currently on the LAN,
please make sure the IP address you set is not in use to avoid duplication.)
TR510E User's Manual
48
DISK5212
Setting