Promag TR510E Manual page 23

Get login status ('s', 73H)
Command s
Reply AMMcc
MM- login status (00: logged out extended-mode, 01: logged in extended-
mode), cc-checksum
This command gets the current login status of TR510E. Use this command
to check if TR510E is in Extended mode or not before use other extended
commands.
Terminal sends captured data to Host ('n', 6EH)
Command nNNNN,ccc...c,E,YYYY/MM/DD,hh:mm:sscc
Reply A
NNNN- record number in Hex form, ccc...c- ID-code, E- event (0: OUT, 1:
IN), YYYY- year, MM-month, DD-date, hh-hour, mm- minute, ss- second, cc-
checksum
This command is used to send the currently captured record to Host in
extended mode or real-time data transmission function is enabled. The returned
record number is supplied in Hex format. The TR510E also stores this captured
record into its database memory.
Host should acknowledge that the captured record has received
successfully by command 'a' (61H), or requires TR510E to send the captured
record again by command 'r' (72H) when data receiving failure (only in extended
mode).
Returned data string contains the record number, ID-code of the ID-card
that was used to create this record, event code (i.e. which button was pressed),
and the date and time of record creation.
The TR510E verifies the currently captured record before sending it out to
the Host.
Captured record validity is verified on a field-by-field basis. Should the field
TR510E User's Manual
23
Possible error codes: none
Possible error codes: 08