Promag TR510E Manual page 38

Unexpected ID-code (group-1 registers 8DH-92H)
Set
Command CRR,unexpected_ID-code_string
Reply A
Get
Command BRR
Reply Aunexpected_ID-code_stringcc
RR- register number (group-1) in Hex form (8DH-92H), unexpected_ID-
code_string is the string of unexpected ID-code to be set (0-37 digits long), cc-
checksum
Sometimes TR510E may get unexpected ID-code that caused by noise
signal. After downloading database, you will find unexpected ID-code in
database. You can set the unexpected ID-code string into TR510E to avoid it.
Once unexpected ID-code strings are set, TR510E will compare every ID-code
read-in with those unexpected ones that are set and reject the ID-codes that
match.
TR510E allows you to set 6 unexpected ID-code strings. The length of
unexpected ID-code string can be 0 to 37 digits. The string 0 character (empty)
will disable the check of unexpected ID-code. Default value for this setting is ""
(empty string), i.e. unexpected ID-code matching is disabled.
Bell table (Week mode), times (group-2 registers 00H-DFH)
Set
Command PRR,hhmm
Reply A
Get
Command QRR
Reply Ahhmmcc
RR- register number (group 2) in Hex form (00-DFH), hh- hour, mm-minutes,
cc- checksum
TR510E User's Manual
38
Possible error codes: 04, 07
Possible error codes: 04, 07
Possible error codes:04, 07
Possible error codes: 04, 07