Promag TR510E Manual page 28

40H-5FH
60H-7FH
80H-9FH
A0H-BFH
C0H-DFH
Table below lists all available group-3 registers:
00H-1FH
20H-3FH
40H-5FH
60H-7FH
80H-9FH
A0H-BFH
C0H-DFH
LED display mode (group-1 register 00H)
Set
Command C00,MM
Reply A
Get
Command B00
Reply AMMcc
MM- display mode (00: wall-mount operation, 01: desktop operation), cc-
checksum
This register is used to set the LED display mode. Because TR510E can be
used both as a wall-mount and as a desktop device, the LED data must be
displayed in either orientation. Setting register to 00 (default) adjusts LED
picture for wall-mount operation. Setting the register to 01 rotates the image so
that it appears correctly when operating as a desktop device. Note: the mode
parameter must be supplied as a 2-digit number, i.e. "00" or "01". Supplying just
one digit will generate error 04.
TR510E User's Manual
Bell table of Tuesday, 'time' field (32 registers)
Bell table of Wednesday, 'time' field (32 registers)
Bell table of Thursday, 'time' field (32 registers)
Bell table of Friday, 'time' field (32 registers)
Bell table of Saturday, 'time' field (32 registers)
Bell table of Sunday, 'enable/disable' field (32 registers)
Bell table of Monday, 'enable/disable' field (32 registers)
Bell table of Tuesday, 'enable/disable' field (32 registers)
Bell table of Wednesday, 'enable/disable' field (32 registers)
Bell table of Thursday, 'enable/disable' field (32 registers)
Bell table of Friday, 'enable/disable' field (32 registers)
Bell table of Saturday, 'enable/disable' field (32 registers)
Possible error codes: 04, 07
Possible error codes: 04, 07
28