Promag TR510E Manual page 19

turn out to be invalid, its contents are substituted for a "safe" default data:
•
ID-code. If ID-code turns out to contain illegal characters (i.e. with
codes outside of 20H-7FH range), then these characters are
substituted for "_". If ID-code length is outside of valid margins* then
entire ID-code is substituted for the following code: "0000000000" (ten
'0' characters)
•
Date. If the date is invalid (i.e. December, 32
(1999/01/01) is used
•
Time. If the time is invalid (i.e. 24:00:00) then default time is used
•
Event. if Event code exceeds 1, then this field is substituted for "0".
*Note: for JIS-II code, the valid length of ID-code is "1<= margin <=69"; for
Track1 code, the valid length of ID-code is "1<= margin <=76"; for Track2 code,
the valid length of ID-code is "1<= margin <=37".
Get the total capacity of database (number of records in the LOG) ('W', 57H)
Command W
Reply ANNNNcc
NNNN- the total capacity of database in Hex form; cc- checksum
This command can be used to retrieve the total capacity of database (the
total number of records in the database). Leading zeroes are not omitted, so
reply string length is always the same.
Initialize the database ('E', 45H)
Command E
Reply A
Executing this command initializes the database. This command can be
used to delete all database data and restore the database functionality in case
of database malfunction.
TR510E User's Manual
19
nd
) then default date
Possible error codes: none
Possible error codes: 09