DEMAG DRC-10 Operating Instructions Manual page 3

9 Information menu in connection with DRC-DR
9.1 Activating the Information menu
9.2 Selecting the information source
9.3 Activating the display travelling hoist selection
9.4 Starting screen
9.5 Navigating in the information menu
9.6 Data of the information menu
10 Technical data
10.1 Dimensions
10.2 International postal registration
11 Eliminating faults
EC conformity declaration
Programming parameters of the DRC-10 hand-held transmitter
(For authorized personnel only)
1 Menu for programming the hand-held transmitter
1.1 Activating the menu
1.2 Displaying the current parameters
1.3 Displaying the serial number of the hand-held transmitter,
Parameter code 001
1.4 Displaying the software version of the hand-held transmitter,
Parameter code 002
1.5 Displaying the hardware version of the hand-held transmitter,
Parameter code 003
1.6 Displaying and entering a fixed frequency channel,
Parameter code 004
1.7 Displaying and entering the cut-out time in STOP mode,
Parameter code 005
1.8 Displaying and entering the cut-out time in Run mode,
Parameter code 006
1.9 Displaying and entering the max. quick charging time,
Parameter code 007
1.10 Frequency hopping
Accompanying documents:
DRC-MP operating instructions
DRC-DR operating instructions
Page
214 994 44 720 IS 975
214 953 44 720 IS 975
33
33
33
33
33
33
34
35
35
36
37
40
41
42
42
42
42
43
43
43
44
45
46
46
3