Lcd Display - DEMAG DRC-10 Operating Instructions Manual

5.2 LCD display

DRC-MP radio receiver display
Battery capacity
Display of selected
travelling hoist(s)
2nd main row with alpha-
numerical display
16
As standard, all keys on the hand-held transmitter are designated in the factory
with the relevant foil symbols.
If requested by the owner, it is also possible to apply other, for example, country-
specific symbols for the direction keys on the radio control system. The owner then
has to remove the existing symbols and apply symbols required by him. Note that
when the radio control system is used in connection with a DR rope hoist, the func-
tions of the individual keys are pre-defined.
To replace the symbols, proceed as follows:
• The keys must be free from adhesive, dust and grease. Clean, as required, with
spirit or alcohol.
Solvents, benzene, cold sprays, etc. could damage the key mate-
rial. (see fig. 1 for hoist unit functions)
• Remove the symbol required for the assigned function from the symbol sheet.
Attach the adhesive symbols in the relevant function key.
42055744.eps
The hand-held transmitter is provided with a display. In the display, all data impor-
tant for operation of the crane to be operated are shown.
The number of information items displayed varies depending on the type of re-
ceiver. The scope of display functions comprises the general displays which are
available for both receiver types and additional information that can only be used
with DRC-DR receivers.
Crane identification
K564
0005
In the case of temperatures below 0 °C, the contrast of the LDC display is reduced
and the time for changing the characters increases.
Radio signal quality
1st main row
with large icon or
numerical display
42694944.eps