DEMAG DRC-10 Operating Instructions Manual page 17

5.2.1 General display Crane identification K564
The crane identification shows to which crane the hand-held transmitter has been
assigned. It is saved in the radio receiver and it can only be entered via the hand-
held transmitter.
Display of selected travelling hoist(s)
The display of the selected travelling hoists is only active, if there are two travelling
hoists and both can be operated with one radio control system.
Symbol Meaning
I Travelling hoist 1 is selected
II Travelling hoist 2 is selected
I+II Travelling hoists 1 and 2 are selected
Display of radio connection quality
Symbol Meaning
Full signal strength
50 % of max. range between transmitter and receiver reached
Weak signal: If the distance between the hand-held transmitter
and the radio receiver is further increased, the radio connection
may be interrupted.
K564
Signal strength icon
42658944.eps
17