DEMAG DRC-10 Operating Instructions Manual page 13

3.2.1 Downwards compatibility of
DRC-10 D2 transmitters
3.2.2 Compatibility
D1, D1 FH and D2
3.2.3 Frequency hopping feature
For combining DRC-10 D2 transmitters with D1 type receivers
DRC-DR, part no. 719 441 45
DRC-MP, part no. 773 432 44
these transmitters must be programmed for operation at a fixed frequency (chapter
„Programming parameters of the DRC-10 handheld transmitter", section 1.6).
The table below shows an overview of the possible combinations.
Product
Type Part no.:
DRC-10
D1
773 431 44
DRC-J
D1
773 460 44
DRC-10
D1 FH
773 581 44
DRC-J
D1 FH
773 583 44
DRC-10
D2
773 591 44
Explanation:
D1 without frequency hopping
D1 FH with frequency hopping
D2 with frequency hopping and, if required, with extended functions
Transmitters and receiver with frequency hopping can be identified by the part no.
on the rating plate.
Additionally transmitters with frequency hopping have a different symbol for the
signal strength in the display.
Transmitter without frequency hopping
STOP
Receiver
D1 D1 D1 FH
DRC-MP DRC-DR DRC-Mp
773 432 44 719 441 45 773 584 44
OK OK
compatible
OK OK
compatible
Fixed Fixed
frequency frequency
Fixed Fixed
frequency frequency
Fixed Fixed
frequency frequency
Transmitter with frequency hopping
D1 FH D2
DRC-DR DRC-DR
719 436 45 719 439 45
not not not
compatible compatible
not not not
compatible compatible
OK OK OK
OK OK OK
OK OK OK
???
???
STOP
42747544.eps
13