Table of Contents
Advertisement
5.3 Identification
labels for the crane
installation
5.3.1 Coding labels
Display of crane identification on hand-held transmitter
20
Every crane with wireless control must be identified by means of an easily visible
crane identification/number. Travel direction symbols on the crane and the travel-
ling hoist must identify the movement directions of the travel motions in line with
the identification of the keys on the hand-held control system.
The coding labels are used for illustration of the crane identification on the
travelling hoist or on the crane. The crane identification illustrated by means of the
coding labels must be identical with the crane identification shown in the display of
the DRC-10 hand-held transmitter.
Black carrier foil
Part no. 895 639 44
K564
The coding labels (dimensions 150 x 150 mm) (black background foil + foil with
number) must be fitted on the hoist unit in such a manner that they are easily
visible.
Numbers 1 to 9 are produced by removing the yellow segments.
Yellow segment
Part no. 895 640 44
Crane identification
42056044.eps
42658944.eps
Hide quick links:
Advertisement
Table of Contents
