Option Switches - Nonin Avant 9600 Operator's Manual

Operating the Avant 9600
Function
Memory Download
and/or Clear Menu
Patient Security
Serial Output

Option Switches

The Avant 9600 contains eight option switches located under the back cover (See "Installing the
Batteries" for instructions on removing the back cover). The device is supplied with all option
switches in the DOWN position.
Table 5: Advanced Functions (Continued)
Button
+
+
+
Action
®
Nonin nVISION software is required for
memory download.
• Press and hold the Time/Date
button while turning on the device.
• Follow the display prompts after the
PLy bAC message clears.
Note: Memory cannot be cleared when
the device is in Patient Security mode.
• To access Patient Security mode,
press and hold both the Alarm
Limits and Time/ Date buttons for
5 seconds. The current Patient
Security mode displays in green on
the Numeric LEDs:
• "111 111" (enabled mode)
displays when Patient Security
is on.
• "000 000" (disabled mode)
displays when Patient Security
is off.
• To change Patient Security mode,
press the Volume button while the
mode is displayed. The new
Patient Security mode (Enabled or
Disabled) is then displayed in
amber on the Numeric LEDs.
• Simultaneously press and hold
both the Time/Date and Volume
buttons for three seconds. Adjust
the serial output rate with the Plus
and Minus buttons.
13