Table of Contents
Advertisement
Function field in the display
SET SEL STO SYM ASY
Hidden mode
HIDDEN MODE
STICK CALIBRATION
Stick calibration
–100 %
1
2
0 %
3
0 %
4
0 %
5
0 %
0 %
6
7
0 %
0 %
8
9
0 %
10
0 %
11
0 %
0 %
12
22 / 28
Depending on the given menu, certain function fields will appear on
the bottom display line.
A marked function is activated by pushing the SET key.
Function field:
SET (SET)
SEL (SELECT)
STO (STORE)
SYM
ASY
The menu "Hidden Mode" can be reached from almost any menu
position.
push and hold the left, the right and the lower keys of the left four-
way keys.
If the center position of your self-neutralizing control stick does not
precisely correspond to 0% control travel, you can check and correct
it as follows.
Stick calibration step by step:
Move to the "Model memory" menu and initialize a free model
memory. Whether the model to be initialized is a winged aircraft or
a helicopter is irrelevant.
Move to the "Servo display" menu, pressing the VIEW key of the right
four-way keys, without any interim change to trim settings or other
program settings.
In this menu point you can check if your sticks are correctly centered.
Bring then all the sticks in the middle position. If the sticks are cor-
rectly placed, this display should ideally look like the one shown on
the left.
Otherwise the graph bars show current setting percentages for con-
trol stick control functions which are not self-neutralizing.
Setting
Selection
Store
Set values symmetrically
Set values asymmetrically
Switch symbol field
(assignment of all types of
switches)
Within a menu, change to the
Second page (menu continua-
tion)
S1002.PRO_jh_V1
Advertisement
Table of Contents
