GRAUPNER mz-12PRO HoTT Manual page 10

12 channel 2,4 ghz transmitter
Hide thumbs Also See for mz-12PRO HoTT:
Table of Contents

Advertisement

10 / 28
Special instructions
 To charge and discharge batteries, only use specifically designed
chargers/dischargers with balancer connector.
 The white connector (cell count + 1 pole) is designed for the con-
nection to a LiPo balancer or a battery charger as a single cell
charger with a manual cell balancer. Always charge the battery
with the balancer connector.
Safety notes for stocking batteries
 Batteries may only be stored in non completely discharged con-
dition.
 Batteries may only be stored in dry rooms with an ambient tem-
perature of +5°C to +25°C.
 Stock the LiPo batteries with a cell voltage of about 3,8V. If the
cell voltage falls below 3 V, then the battery must be necessarily
charged. Deep discharge and storage in discharge status (cell
voltage < 3V) make the battery useless.
 Charge and transport your batteries always in a safety bag.
S1002.PRO_jh_V1

Advertisement

Table of Contents
loading

Table of Contents